Controller CNC 4 Axe + telecomanda encoder (stand alone)
[R10-A10]
1.532,00Ron

Controller CNC 4 Axe + telecomanda encoder (stand alone)

Controller cnc 4 axe , stand alone + telecomanda cu encoder.

Procesor ARM foarte stabil si foarte rapid.

Citeste fisierele direct de pe stick USB.

Recunoaste fisiere normale gcode.

Multiple seteri din meniu.

Intrari, iesiri pentru limit , freza , ungere etc.

Permite conectarea driverelor pentru motoare pas cu pas cat si pentru servomotoare.

RMHV2.1 is the 4 axis and 4 axes motion controller which has been researched and developed by RATTM
MOTOR for four years. The control period of each position is only 4 milliseconds, with a high control precision. The
highest uniaxial output pulse is 500KHz and the pulse width can be adjusted. It supports the common stepper motor and
servo motor.
RMHV2.1 numerical control system adopts the ARM+FPGA design framework. The ARM can finish the part of
human-computer interface and code analysis and the FPGA can finish the part of underlying algorithm and control
pulse generate, with the reasonable design, reliable control and easy operation.
The panel layout structure of RMHV2.1 is rational. The CNC MOTION SYSTEM Controller can be finished only
by 17 keys and it supports the FANUC with high universality to be compatible with G code set.
This manual introduces the operation method of the RMHV2.1,the machine tool and the operation procedure of the
machine tool. By lots of graphical representation and examples, the uses can quickly learn to use the RMHV2.1 CNC
system.

1.2 ) Performance parameter
 Ordinary digital input interface of 16-circuitoptocoupler coupling isolation
 Ordinary digital input interface of 3-circuit optocoupler coupling isolation
 Output interface of 0-10V spindle control port with analog quantity(can be modified as PWM output);
 Support the 4 axis stepper motor control, the highest control pulse output of single axis is 500KHz;
 ARM9 main control chip;
 FPGA core algorithm chip;
 4.3 inches TFT screen, resolution ratio: 480*272;
 17 operational keys;
 The main control equipment is 18V-32V power input, the current capacity is required not to be lower than 0.5A;
 Support the USB flash disk to read the G code,and the size of G codefile has no requirement;
 Be equipped with MPG port and support digital display MPG as well as support the general MPG in the market.
 Support the panel key with single-axis manual operation, manual step and CONToperation;
 Support the operation of quickly specify the running position;
 Support the multi coordinate systems (with automatically saving function in case of power cut);
 Support the function of saving data automatically after power down (press the start to automatically save the data
in the operation, automatically save the data after power down)

 

Link acces manual :  https://drive.google.com/file/d/0B49xwe9ffk3fZExEemJ5a1dRTGs/view?usp=sharing

Comentarii
Căutare rapidă
 
Folosește cuvinte cheie pentru a găsi produsele.
Căutare avansată
Catalog Produse